Microcontroller module MCM xxx-G
The MCM module decodes the time signal and puts out the checked time and date information to an RSR232 compatible interface.
A special command set (s. datasheet) was developed for the communication between the module and a host computer. To save power the MCM module is able to control the time code receiver unit by the PON pin.
Technical characteristics: (Test conditions: VDD=3,0V ; VSS=0V; ( + for current into the module))
Parameters
|
Symbol
|
min
|
typ
|
max
|
Unit
|
Operating temperature range
|
TA
|
-10
|
|
60
|
OC
|
Power supply
|
VDD
|
2,4
|
|
3,6
|
V
|
Power consumption
-normal mode
-receive mode
|
IDD
|
15
0,5
|
20
0,7
|
50
1,0
|
ľA
mA
|
Input voltage HIGH
|
VIH
|
0,8*VDD
|
|
VDD
|
V
|
Input voltage LOW
|
VIL
|
VSS
|
|
0,2*VDD
|
V
|
Output current HIGH (VOH=2,4V)*
|
IOH
|
- 0,8
|
- 1,3
|
- 2,1
|
mA
|
Output current LOW(VOL=0,6V)**
|
IOL
|
1,5
|
2,4
|
3,5
|
mA
|
*for connector pads: X4, X5, X6 ** for connector pads: X4, X5, X6, X8
Models Microcontroller module:
Engineering
parameters |
Modell (MCM xxx) |
Input signal |
Notes |
 |
 MCM DCF G |
DCF 77 ; 77,5 kHz |
In a case,pured |
| |
MCM DCF TG |
DCF 77 ; 77,5 kHz |
In a case pured, Extended temperature range
|
| |
MCM DCF |
DCF 77 ; 77,5 kHz |
|
 |
MCM DCF U |
DCF 77 ; 77,5 kHz |
power supply controller |
|
 mechanical drawing |
 circuit plan |
|
